Foresight and planning vital to build truly smart cities | Sunday Observer

Foresight and planning vital to build truly smart cities

There was a lot of buzz about 5G, smart mobility, general IoT, and smart cities. It feels like we’re entering the future, and the excitement is palatable. Unfortunately, there are many soldiers on the battlefield without a plan.

Smart cities need an orchestration framework. The smart cities of tomorrow require more than simply deploying connectivity, sensors, and devices. Incrementalism will not serve cities well. Foresight and planning are necessary to build cities that are truly smart.

Here are 10 key elements that are required for truly smart cities and for understanding any smart city initiative in context.

Ten key features that make a city smart:

1. Ubiquitous connectivity

It’s tough for a city to be smart without redundant, high-speed, low-latency wireless communications. That’s why 5G has so much attention and is so exciting.

For 5G to be maximally effective, the deployment strategy needs to bring 5G closer to the “action” than where a lot of 4G currently resides. To support real-time decisioning for autonomous vehicles, for example, 5G needs to live on the streets. It needs to be directly paired with curbside cameras, sensors, and processing that can, without a nanosecond of delay, support high-speed vehicles in motion.

Smart city architectures must also include low-power wireless access (LPWA) that supports power-limited devices. For things like battery-powered devices floating in wells that report water level once a day, an energy-efficient communication protocol is paramount in such scenarios.

2: Resilient and advanced energy

Smart city solutions demand advanced energy networks that are sustainable, secure, dynamic, and resilient. You can’t grant a city the moniker of “smart” without resilient, advanced energy.

Consider this. There isn’t an IT engineer on the planet who would build a data center without a UPS (uninterrupted power supply) and backup power. Why would we plan for anything less with high-value city infrastructure? If communications and intelligence systems are only available when the grid is up, we fail citizens during catastrophes and extraordinary events, when they need services the most.

3: Security and privacy

We must integrate security into smart city platforms from the start, not as an afterthought. Insecure solutions are not acceptable. Access protocols and communications require an advanced security architecture that keeps out malicious agents. Overrides and mandatory upgrade paths must also be embedded into the architecture to prevent and mitigate the impacts of cyberattacks.

Security is about more than protecting systems and places; it is also about protecting the privacy of citizens that pass near city equipment. Smart solutions must respect citizens.

4: Sensors and measurement

Data capture has long been a major focus of smart city work. Smart cities are instrumenting literally everything possible, continuously adding new data capture capabilities. Weather, wind direction and intensity, road surface temperatures and conditions, air quality, radiation, pollutants, foot traffic, vehicle traffic, wildlife, soil moisture, noise pollution, light levels, pollen, water quality, water levels, vibration, tilt, sewage flow rates, valve pressure, and cameras are some types of data that smart city devices collect.

But data alone is not enough to make a city smart. Smart requires a corresponding, tiered architecture for processing that data and acting on the derived conclusions.

5: Curbside compute

In the cities of tomorrow, we will be dealing with volumes of data and the need for decision speed, which won’t allow for sending everything back to centralized processing in the cloud.

Things will move too fast for proverbial soldiers to wait for central command to tell them when to shoot. Just think about the coming dynamism needed for autonomous vehicles and drones, for example.

Municipal systems cannot be deployed as a set of dumb nodes tied to an intelligent core.

6: Sidewalk storage and caching

Storage goes hand in hand with compute.

To be smart, cities also need to deploy storage at the very edges of our communications infrastructure as part of a tiered storage and caching network.

The immense volumes of data we’ll accumulate each minute will require pairing with local storage to avoid needless, crippling network congestion.

7: Hardware maintenance and upgradeability

Even the brightest minds fail in getting everything in complex systems 100 percent right the first time around. Thus, smart city infrastructure needs to be maintainable and upgradable. We simply can’t require ripping up of concrete and working through lengthy planning processes for every improvement to our city infrastructure. Technology moves too fast.

8: APIs and third-party development

With distributed cache and compute comes the natural question of development platforms for third parties.

Smart city technology vendors, in partnership with municipal leadership, and with security in mind, must identify ways to thoughtfully expose access to resources, data and APIs to create new intelligence, apps and experiences.

9: User interfaces

With consumer devices, we’re on a trajectory for interfaces from wired (PC) to wireless (smartphone) to ambient (Amazon’s Alexa). Similarly, truly smart cities will turn public spaces into interfaces.

10: Better design

Historically, municipal and utility infrastructure has tended toward unattractive design — utilitarian, by definition. We can and must do better to make the public infrastructure that supports our daily lives beautiful, inspirational, and engaging.

The writer is the co-founder and CEO of Totem 

Comments

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.